AUTONET TV

Clean Machine (Fuel and Air Induction Cleaning)

As your vehicle ages, its performance isn’t quite what it used to be, but many of us never notice the change because it’s gradual.  So here are a few questions to ask yourself.  Does your vehicle feel like it doesn’t have the pep that it used to? Have you noticed your fuel economy isn’t quite as good as it once was? Does it idle roughly or is it hard to start?  Do you hear the engine knocking? Has it recently failed an emissions test?

All of those can be signs that your fuel and air induction systems are dirty and need cleaning.  Your fuel system takes gasoline from the tank to the engine’s combustion chambers where fuel injectors spray fuel that mixes with air and is ignited by spark plugs.  Black carbon deposits eventually can build up, obstructing fuel flow and diminishing your engine’s performance and fuel efficiency.

The air induction system is what allows air to go into the engine’s combustion chamber.  Getting the proper air flow is necessary for you to quickly start your vehicle, accelerate, and perform the way it should and idle smoothly when you’re standing still.  Like the fuel system, your air induction system can get blocked up with deposits and other contaminants.

A professional fuel and air induction cleaning can help restore your performance and fuel economy, especially when you are experiencing problems.  A technician will use specialized chemicals that can remove the carbon buildup.  In extreme cases, they will remove the fuel injectors and clean them with specialized tools.  

After cleaning, you may notice how much more pep your vehicle has and how smoothly it runs.  Keep your fuel and air induction systems clean and enjoy your vehicle’s performance improvements.

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
http://www.longhillautonj.com

(Timing Belt)

You may have heard about an important part of your vehicle's engine called a timing belt, and many know that if that belt breaks, it can cause some very serious engine problems.  

Not all vehicles have them, and the ones that do generally have smaller engines.  The timing belt keeps the engine synchronized so that every time a spark plug fires, the crankshaft, camshaft, pistons, and valves are all working together.  Timing belts will eventually have to be replaced, and most vehicle manufacturers recommend when that should be.  Typically, it's around every 60,000-100,000 miles, or 100,000-160,000 km. It's a good idea to stick to your vehicle's schedule or be alert for signs that the timing belt may be failing prematurely.

Some of those symptoms? Maybe your engine won't even turn over when you try firing it up. You might hear a ticking or banging sound under the hood.  Perhaps you spot an oil leak or notice the engine misfiring.  If any of those are happening to your vehicle, we strongly advise you to bring it in to us so we can have a technician see what's causing the issue. 

Again, if your timing belt breaks, it can cause serious, expensive engine damage to valves and pistons. It is far better to have the timing belt replaced before it breaks.

Replacing it is fairly involved, and other associated parts, such as the water pump, thermostat, tensioner, and idler pulleys may be replaced at the same time.  That way, your timing belt is more likely to last another 60,000-100,000 miles/100,000-160,000 km without any problems. 

Timing belts are being used in fewer vehicles, with more and more using timing chains since they last longer.  If you're wondering if your vehicle has one, contact our service adviser who can check. Maybe it's time to schedule a timing belt replacement to keep your vehicle's engine parts working in harmony as they should.

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
http://www.longhillautonj.com

Not-So-Common Sense (Sensor Failures)

So your vehicle won't start.  What's the first thing that comes to mind?  Battery dead? Starter motor worn out? Out of gas?  Well, those are all reasons that make sense.  But your vehicle may be refusing to start because one of its computers is being warned that to do so might damage it.  Here's how that works.

You have lots of computers in your vehicle.  They need to know the status of things so there are several sensors monitoring various things going on.  These sensors send information to the computers that adjust the fuel and air mixture so you don't waste fuel.  They know when things aren't quite right and prevent you from starting your engine if that's going to damage it. 

Other sensors make sure the coolant is the right temperature, check to see you are not polluting the air and make sure other electronic components are performing their tasks correctly.

Here's an example of a sensor doing its job.  Your engine needs oil to lubricate metal components so the friction doesn't damage them.  Your engine has an oil pressure sensor that tells a computer called the Electronic Control Unit (ECU) if things are good to go or if there's something wrong, maybe the oil pressure is too low to keep things lubricated.  If it is, it gives a signal for the vehicle not to start, protecting the engine. 

Of course, the sensors can go bad, too, with some of the same results.  And so someone has to figure out if it's the sensor that's failed or if it really has detected a problem.  That is the challenge for technicians with specialized equipment to decipher the signs.  If a bad sensor is found, it may need to be replaced.  Sometimes a thorough cleaning can do the trick.  In either case, your service facility can track down the problem and get you back on the road.  Makes sense, doesn't it?

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
http://www.longhillautonj.com

Straight Ahead (Wheel Alignment)

If every road was straight and smooth, we wouldn't have to worry much about wheel alignment. But they're not, so we do.  Hitting potholes or driving on rough pavement can knock your vehicle out of alignment and you'll notice it in one of several ways.

Your steering wheel may not be centered when you're driving straight ahead, or your vehicle may pull to one side.  You may find your tires wearing on one side or they may squeal.  All are signs that could point to you needing an alignment.

Your wheels should be perpendicular to the road and parallel with each other.  If not, your tires will wear out faster and your vehicle won't go straight on a level straightaway.

In alignment, there are several factors that must be checked.  One is camber.  Your wheels should be straight up and down if you look at them from the front. If not, you'll wear your tires unevenly on one side.

Another factor is caster, the angle of the steering pivot.  Most vehicles have what's called positive caster, when the top of the steering pivot leans toward the rear.  Proper caster balances steering effort, stability on the highway and cornering.

You may have heard the term "toe" in reference to your wheels.  If you looked at your front wheels from straight above, for example, imagine your wheels were your feet.  If you were to turn your toes in toward each other, that would be toeing in.  The toe of your vehicle should be set to manufacturer's specifications so your vehicle handles well and doesn't prematurely wear out tires.

It's a good idea to have your alignment checked periodically since it can get knocked out by one hard knock or a lot of little knocks.  It's not just about tire wear, it's about ride comfort and safe handling. You may say a vehicle aligned just feels divine.

Long Hill Auto Service
1905 Long Hill Rd
Millington, NJ 07946
(908) 647-7984
http://www.longhillautonj.com